Tracking and Communication
System Function Introduction

This vehicle tracker has GPS and GSM(GPRS)functions. Location information will be send by SMS or GPRS; you can enquiry where the vehicle is on Google map and its history. You can control the vehicle the engine remotely by SMS or internet. The driver can send a SMS via the SOS button to the programed cell number, "fleet manager" or control room. The receiver will receive a SMS and phone the driver in his cab. The speaker has a melody then the driver would be able to communicate hands free. We believe this is a great solution that management could be on site to.

Product Description
  • GSM module: Band: 850 / 900 / 1800 / 1900M Hz
  • Max RF Output: 33.0dBm ±2dBm
  • Dynamic Input Range: -15 ~ -102dBm
  • GPS module: GPS chip set: SiRF Star III
  • Frequency: L1, 1575.42 M Hz
  • Number of Channel: 20
  • Battery Charge: > 4.2V
  • Li-ion: 450 MAh
  • Input Voltage: DC 6~36V
  • Operating Temperature:-45~65° Coltage: 3.7V
  1. Use Google map, Global free
  2. Real-time locating/ inquiry
  3. SOS button/Power-cut Alarm
  4. Listen by telephone
  5. E-fence/Over-speed Alarm
  6. Compatible original ant i-theft
  7. Remote control engine
Magnet / Real time tracker
Installation Instructions

Installation Figure

Installation and Test

Please test installation. If you don't need some functions, you can disconnect corresponding interface. Please make sure ACC, DC, GND is installed correctly. Ohterwise, the device cannot work. Please check the device status through signal light after power on:

  • LED1 is off which indicates there is no power
  • LED2 flashes for one second which indicates GSM registers successfully
  • LED2 flashes three seconds once, which indicates GPS is obtaining orientation
  • LED2 is on which indicates work successfully that GSM has registered and GPS has obtained the orientation.